Sullivan Supply
Sullivan's Chute Mat
7CM-29" x 84", 50 lbs. 
This 9/16" thick mat is dense and spongy to help keep cattle from becoming fatigued while standing in the chute. Simply lay on top of plywood floor, slip resistant. Not recommended for stall use.


Sullivan's Cadillac Chute
CAD7-7 ft. Cadillac chute with wheels and head tie, 175 lbs. CAD8-8 ft. Cadillac chute with wheels and head tie, 190 lbs.  F.O.B. Motor Freight 
Freight quotes available upon request only.
Dimensions:     7 ft. Cadillac chute, 6 ft. high x 34 in. wide
      8 ft. Cadillac chute, 7 ft. high x 34 in. wide
Extra chute items:     CHUTE FLOOR-pre-cut 5/8" plywood floor 7FL-7 ft. chute floor  8FL-8 ft. chute floor 

 

  • Handle for head gate does not stick out past the side of the chute. No more hitting your head on the handle!
  • Spring loaded side bars can go up and down or sideways, no more clumsy handles or latches for side bars.
  • New head tie yoke angles up to allow for more head room.
  • Built to last-yet easy to move!
  • Portable enough for shows, can be set up or taken down in minutes.
  • Durable wheels are small enough not to get in the way.
  • Handles in back make it easy to move
  • 2 inch square tubing, 14 gauge steel
 
Alluminum Cadillac Chute
AL7-7 ft. Aluminum chute with wheels and head tie, 110 lbs.
6 ft. high x 34 in. wide 
AL8-8 ft. Aluminum chute with wheels and head tie, 115 lbs.
7 ft. high x 34 in. wide  
Extra chute items:     CHUTE FLOOR-pre-cut 5/8" plywood floor 7FL-7 ft. chute floor 
       8FL-8 ft. chute floor 

 

  • Same great design as the Sullivan's Steel Cadillac Chute!
  • Spring loaded side bars can go up and down or sideways.
  • No more clumsy handles or latches for side bars.
  • Handle for head gate does not stick out past side of chute. No more hitting head on handle!
  • Portable for shows - can be set up or taken down in minutes.
  • Reinforced in often trouble spots for aluminum chutes.
  • Durable wheels and handles in the back make it easy to move.
  • Portable for shows - can be set up or taken down in minutes.
  • 2 inch square tubing, 9 gauge aluminum
 
Sullivan's Breeders Display
SD-Stall Divider, 60 lbs. 
RSH-Ranch Sign Holder, 18 lbs. 
Stall Divider is made of square tubing with mesh on bottom of divider to hold bedding in place. Divider nails to the front of the stall. The divider is 8 feet in length, 42 inches tall at the front of the divider and 30 inches tall at the back of the divider. (Feet sold separately.)

The Ranch Sign Holder is made of square tubing and will also hold your fork and scoops in place. The top tube extends out 28 1/2 inches allowing you to easily hang a sign that is up to 30 inches wide. The height of the sign holder extends from 7'2" to 7'6" off the ground and makes your sign very noticeable.

The design of the breeders display will enhance your cattle and bring respect to your ranch home.
Optional Breeders Display Items (Not Pictured) SDF-Stall Divider Feet, 1 lb. 

Breeders Headtie BHTD-60 lbs.  F.O.B. Motor Freight Headtie package to use with stall dividers (sold separately) uses the same headtie setup that is featured in the fan cage. Included front L bars of fan cage and 4 head ties. Extends 8 ft. to 15 ft. and holds up to 4 head.

Breeders Headtie Extension BHTE-60 lbs.  F.O.B. Motor Freight Extension package doubles the size of your Breeders Headtie. Uses the same front headtie T piece that is used on the fan cage extension. Includes "T" piece and 4 head ties.
Sullivan's Fan Cage
CAGE1-240 lbs.  F.O.B. Motor Freight  
RSH-Ranch Sign Holder, 18 lbs. 
RSHA-Ranch Sign Holder Attachment for Fan Cage, 3 lbs.  (Attachment must be used to mount Ranch Sign Holder to Fan Cage.)  
SFCA-Side Fan Cage Attachment (Not Pictured), 15 lbs.  (Attachment for hanging fans on the sides of your fan cage.)
A complete professional setup that includes two stall dividers, four front head ties and four fan hangers. Extends from 8 feet to 15 feet and will hold 1 to 4 head. The height at the front of the fan cage is 6'2" and the height at the back is 6'7" tall. Stall dividers are 8' long. Fan cage is made of square tubing for long lasting durability. Simple to setup and break down. Easy to haul. High quality!
Optional Breeders Display Items (Not Pictured) CAGEFB-Fan Bracket only for fan cage, 1lb. 
CAGEHB-Headtie Bracket only for fan cage, 1lb. 
Sullivan's Fan Cage Extension
CAGE2-60 lbs.  F.O.B. Motor Freight
Extension package used to double the size of your fan cage. Includes 2 T's, 4 front head ties and 4 fan hangers. Extends fan cage setup from 15 feet to 30 feet. Will fold approximately 8 head of mature animals. (Fan cage sold separately.)

Large


Medium
Sullivan's Showtime Galvanized Steel Show Boxes
STES-Small 21" x 24" x 34", 60 lbs.
STEM-Medium 21" x 24" x 40", 75 lbs.
STEL-Small 21" x 24" x 58", 90 lbs. F.O.B. Motor freight on large box. 
STEPS-*-Optional padded top for small, 5 lbs.  STEPM-*-Optional padded top for medium, 5 lbs.  STEPL-*-Optional padded top for large, 5 lbs. 

*Colors available: B-Black, BL-Blue,R-Red, M-Maroon, G-Green

STET-Extra tote tray, 5 lbs. 
STEC-Extra Comb/Showstick clip, 8 oz. 

  • An economically priced box.
  • Solid construction-strongest and most durable galvanized box made.
  • 20 gauge galvanized steel with reinforced sides.
  • Unique lid stop on hinges, no chains or cables.
  • Removable sliding tote tray with handles. Allows you to have organization in your box and remove tray for out of box use, small and medium includes one sliding tote tray, large box includes two sliding tote trays.
  • Dividers on bottom of box for better organization.
  • Large box has three hinges for lid, four handles, show stick holder, comb holder, document storage pocket and a built in shelf deep enough for quart bottles with sprayer tops attached.
A GREAT SHOW BOX DESIGNED BY SHOWMEN FOR SHOWMEN!
Sullivan's Double Stack Galvanized Upright Show Box Set
UGDB-Drawer Box, 24" x 24" x 23 1/2", 88 lbs. 
UGSB-Shelf Box, 34" x 24" x 23 1/2", 70 lbs.
  • 22 gauge steel reinforced sides.
  • Individual shelves.
  • Doors swing a full 180 degrees for greater accessability.
  • Sliding drawers allow more efficient use of space.
  • Size of drawers: Top drawer, 5" x 22" x 22" ; Bottom drawer, 13" x 22" x 22"
  • Halter rack.
Sullivan's Showcase Show Box
SSC-16 1/4" x 8 1/2" x 37", 30 lbs.
SSCL-16 1/4" x 8 1/2" x 50", 38 lbs. 
  • Innovative design.
  • 22 gauge galvanized steel with reinforced sides.
  • Pig whip holders.
  • Tray for small equipment.
  • Features a large cushioned handle on each end.
  • Chain and hook assembly allows you to hang it almost anywhere.